Curtain Walling
Blyweert Range-Kratos 'Stick' Curtain Wall System
The Kratos Curtain Wall has many options and alternatives for construction and building design details.
Scope:
- Kratos Grid Vertical Façade
- Kratos SSG Vertical Façade
- Kratos SSG Horizontal/Vertical Definition Façade
Options:
- Mullion and Transom profiles are available in graduated sizes to meet varying structural requirements.
- 3 Levels of drainage.
- Accommodates 6mm to 50mm Glazing /Infill's .
- EPDM Gaskets with moulded corners.
- Identical inner gasket detail between Transom & Mullion.
- Can integrate with all Beaufort and Blyweert Range products.
Use our enquiry from to contact us for more information or call 01452 414853 now.
Mullion drained-Ventilation Principle
The Kratos P52 curtain wall is to be mullion drained with drainage and ventilation achieved via drainage deflectors at the top and bottom of the wall and located above mullion to mullion joints.
The drainage deflectors evacuate water from the drainage channels in the mullion and out through the pressure plate zone. Transoms are to be notched and overlapped to the mullion which incorporates a butyl tape to seal between mullion and transom.
The system is designed with a positive location between pressure plate and isolator to ensure water ingress via the transom zone is avoided.
Use our enquiry from to contact us for more information or call 01452 414853 now.
Compartment Drained - Ventilation Principle
The Kratos P52 curtain wall is to be zone drained with drainage and ventilation slots located in the horizontal pressure plates. Ventilation slots are prepared at the top of the zone and drainage slots are prepared at the bottom of the zone.
Transoms are to be notched and overlapped to the mullion which incorporates a butyl tape to seal between mullion and transom. The mullion transom connections incorporate EPDM mouldings and gaskets to maintain each zone.
Use our enquiry from to contact us for more information or call 01452 414853 now.
